Printing Nets

Show us your models and discuss model-making techniques. Paper? Wood? Single vs double tabs? etc.
Post Reply
Squeaky
Posts: 47
Joined: Wed Jan 16, 2008 3:09 pm
Location: Derbyshire, England

Printing Nets

Post by Squeaky » Fri Feb 08, 2008 9:49 am

I wish to print copies of 'nets' together with selected 'edge data'.

How do I do this?

I wish to print out the edge lengths and mitre angles for all the six types of triangles in a geodesic sphere ... in particular the following sphere

Image

I could do this indirectly via 'snagit' but feel it would be nice to have the ability to print out directly from the 4d programme.

My printer can handle colour up to A3 plus.

Squeaky

User avatar
Ulrich
Posts: 91
Joined: Tue Jan 29, 2008 8:08 am
Location: Germany
Contact:

Post by Ulrich » Fri Feb 08, 2008 2:27 pm

You can do this easily by print via preview in the file menue, where you can chose which measures you want to be printed.

Image

Ulrich
Last edited by Ulrich on Mon Mar 03, 2008 12:30 pm, edited 1 time in total.

Squeaky
Posts: 47
Joined: Wed Jan 16, 2008 3:09 pm
Location: Derbyshire, England

Printing Nets

Post by Squeaky » Fri Feb 08, 2008 3:08 pm

Thanks Ulrich!

It shows that it does pay to really read what is available from the various menus.

Anyway problem well solved .... If I was at all sensitive ... I should hang my head in shame... But not much chance of that!

This quick exchange also demonstrates the value of the forum.

Thanks once again

Squeaky

Post Reply