Some JS allow "U" keypress

The place to talk about Stella4D, Great Stella, and Small Stella. Feel free to ask questions about them here.
Post Reply
polymorphic
Posts: 26
Joined: Sun Feb 17, 2008 12:50 pm
Contact:

Some JS allow "U" keypress

Post by polymorphic » Sat Jan 31, 2009 6:23 pm

I don't see this as a problem but some of the Johnson solids allow "Create Unform Polychoron from 3D vertex figure". Not a lot of them but a few. They result in something that is not closed, but creates some very interesting results anyway.

J1 - no complaints but says it has 8 cells but I only see 7. Dual doesn't work.
J2
J3
J4
J11
J19
J62
J63

Roger

User avatar
robertw
Site Admin
Posts: 401
Joined: Thu Jan 10, 2008 6:47 am
Location: Melbourne, Australia
Contact:

Post by robertw » Sun Feb 22, 2009 1:10 pm

It's a pretty advanced feature and applying it to shapes at random will not find many hits. The first criteria that must be met is that a 3D vertex figure for a uniform polytope must have a circumsphere. Otherwise it will fail straight away. Each face of the 3D "verf" (vertex figure) will represent that 2D verf of one of the 3D cells. But for the model to close up is not foreseeable so if not ruled out straight way the software will go ahead and try to create the model. Unlike in 3D, Stella4D will allow incomplete, ie unclosed, 4D models. This is the equivalent of an edge with only one face in 3D. But if unclosed, creating the dual is not possible, as you've found.

Rob.

Post Reply